100-300m/Min 3/5/7 Carton Box Maker and Printing Production Line
|Design Speed m/min||Running Speed m/min||Working width||Multy Ply Board|
|Max. paper width:||2200mm|
|Max. Width of corrugating roll||2270mm|
|Max. speed of machine||120m/min|
|Steam consumption: 4000kg/hour
Working. pressure: 1.0-1.1MPa
(Or as client's country situation)
|1||2200mm Hydraulic Shaftless Mill RollStand
( with 2 pcs of ManualTrolly with track)
|5||1,Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic.feeding kraft / reel paper quickly.
|2||Ø1000mm Preheater||4||1, The preheater roller is under the stander of the 1stclass(grade) pressure vessel of the national.
2, All the surfaces of every rollers have been grinded with high accuracy and chromed plated to less the resistance of paper preheating, long service of using life.
3, Electric to enlarge the preheating area, preheating area can be in 360° to adjust the preheating
|3||320mm Fix Type Single Facer||2||steam heating;drive motor with frequency inverter;Vacuum absorbable feeding|
|4||Duplex Conveying Bridge||1||1, The Main Frame is connected with channel steel, and angle steel.
2, With Protecting Handrail on both sides and safety pedal, the operation side is installed with safety ladder, to make sure the safety and convenience of the worker.
3, PVC feeder belt to transport the single or double face corrugated sheet with corrugated type.
|5||Ø1000mm Triplex Preheater||1||---|
|6||Duplex GluerMachine||1||PLC Controlled|
(Heating & Cooling Section; 14pcs ×600mmheating plates;Driver Roll Stand)
|1||1, Hot Plates' surfaces is grinded and then chromed plated,width:600mm.total14pieces of hot plates, cold shaping part:4m length.
Hot plates are made by container plates, can pass the national first level pressure container standars
2, Hot plates adopts the compressed gravity press rollers structure.
3, Press rollers' lifting up and down are driven by pneumaticstructure.
|8||......||RelatedConfiguration would be adjusted based on end customer different requirement..|
If you have any special requirement,welcome to contact us in 7/24.
Technical Solutation would be made for you in first time..
Separate Equippment and Spare parts is also avaliable..Such as Single Facer Machine,Mill Roll Stand,NC cut off Machine,Slitter Scorer ,Corrugator belt and Slitter knife,etc.
Second Hand Corrugated Cardboard line with BHS/JS/HSIEH HISU/FULI/MINGWEI,etc.