Fibreflow Drum Pulper
Waste paper recycling plant D type hydrapulper, paper pulp making machine
Paper mill paper machine powerful D Hydrapulper pulper used for recycling waste paper to make pulpType:Pulping Equipment
Advantages: Energy saving
Material:Iron wet part is made of 304ss
Function:Break the waste pulp
Used in paper and pulp industry for breaking waste paper and wet-strength paper. This equipment is fitted with P.S. Vokes rotor,
which can strengthen hydraulic cycle and fiber defiberizing and also perform continuous breaking with lower energy consumption.
Rotor deviates from the center of trough body and trough body structure is D-shape, which can make the contact between pulp and rotor quicker, with higher frequency.Thereby, on condition of not increasing power and volume, capacity can be increased. Rotor and extraction disc are above the bottom plane of trough body, thus, one low-pressure flow area can form around rotor to gather heavy impurities, thereby the service life of rotor and extraction plate can be extended.
Main Technical Parameters:
HT Series D type Hydrapulper changed pulp flow direction of traditional pulp machine and make the thick liquid material always flow to the center direction. It improves the height of thick liquid at center position. meanwhile increases the striking times of thick liquid material to the impeller and improve pulping resolution capabilities by 30%.. This equipment is the ideal machine for paper making industry used in the continuous or intermittent to pulp the thick liquid board, damaged paper and wasted paper.
Features of pulper
D type hydrapulper is made up of "D" type tub, rotor device,outrigger, drive mechanism and motor and other major parts.
(1)"D" type tub
"D" type tub welded togetherby steel plate.Flowing external channel steelis used for rei-nforcingthe tub. The guide platelocated in the bottom ofinner coneis used for prompting pulpreflow so that formattingcycle.
The rotor and the plasma discis higher than thebottomofpulper groove plane,a low pres-sure areawill be formedaround the rotor to gather heavy impurities. When the heavy impuritiesdepositto the bottom, they will betaken to the sediment well or heavy slag collecting
tankdue to the effect of rotation of the slurry, which can reduce the touch between the rot-or and the impurities so that prolong the service life of the rotorand prevent the twisted rope winding on the rotorin order to protect the twisted rope and rotor from being damaged.