Hydraulic Mill Roll Stand
Hydraulic Mill Roll Stand For Automatic Corrugator Line
Product Description of Hydraulic Mill Roll Stand
Hydraulic Mill Roll Stand/Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand has a symmetrical structure and can carry two craft paper at one time, which can work without a brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft/reel paper quickly.
Technical Parameters of Hydraulic Mill Roll Stand
Mill Roll Stand Parameters | |
Max. Paper Roll Dia | φ1500mm |
Effective Width | 900mm - 2200mm |
Maximum Support Weight | 3T |
Main Axis | φ242mm |
Pneumatic Source Pressure(Mpa) | 0.4 - 0.8Mpa |
Magnetic Valve Voltage | 380V 50HZ |
Working Pressure (Mpa) | 16-18mpa |
Mill Roll Stand Characteristics | |
The Structure is Double Rotary Shafts with Four Arms | |
Support Two Paper Mill Rolls on both Arms at the Same Time | |
Hydraulic Control for Paper Mill Roller Up-down, Clamp-open, and Centering | |
Web Tension Controlled by Pneumatic Brake or Manual Brake | |
Tapered Center, Stretch Center, and Springiness Chucks are Optional |
Structure and features of Hydraulic Mill Roll Stand
1. The structure is double rotary shafts with four arms; Support two paper roll on both arms at the same time, and could load or unload paper mill rolls non-stop.
2. Hydraulic control the paper roll upward or downward, left shift or right shift, tighten or loosen, centering.
3. Brake adjusting by ventilating disc-type pneumatic brake system.
4. Equipped with twin-stage springiness chucks, size: 3/4 inch.