Industries Cotton and Synthetic Conveyor Belt Endless Pasting Belt for Battery Plant
Basic Info.
Product Profile
Our endless batter pasting belt is made of high-quality raw material and combined with the most advanced technology, use needle punched technology and once formed to achieve the truly seamless. Our Pasting Belt has high wear resistance and long work life: it could past 1 million plates at most. When the belt need to be replaced,there is no requirements for any direction,it could work very well after put it on the machine,the operation is simple,everyone could do that.
Our product specification:
| Item | Use | Surface | Feature | Thickness(MM) | Width(MM) | Inner Diameter(MM) | Tensile Strength(n/mm) |
| HBZ | Negative Plate Coated |
Endless, Surface Rough |
Strong Water Absorption, Acid-Resisting |
6-12 (±0.2) |
220 230 330 356 365 420 508 660 762 Or As Customers' Demands |
1770 1800 1870 1905 1930 2540 2566 3784 3900 Or As Customers' Demands |
360-720 |
| HFB | Positive Plate Coated | Surface Smooth | Strong Water Absorption, Acid-Resisting | ||||
| HMT | Double-Sided Coated |
Endless, Surface With Plush |
Strong Water Absorption, Acid-Resisting, Smooth | 5-10 |
Our Battery Pasting Belt application:
In the production process of the battery, pasting plates isa very important part of the process. There will be needed a conveyor belt to carry the plates to the position of the paste, that conveyor belt is called Battery Pasting Belt.
Our Battery Pasting Belt Feature:
Our belt's surface with high abrasion resistance
Our belt is truly endless surface, no joint
Our belts using the tensile skeleton, there is no deformation, elongation less than 1%
Our belt apply the lead paste is very uniform, the gram weight deviation will be controlled within 3-4g
Daily maintenance and instructions:
1. It should be used within four months after received
2. It should be stored in a low-temperature dry environment, to avoid direct sunlight
3. It should be check if there have any sundries on both sides of the belt, in order to avoid scratching the belts
4. It should be as wet as possible when using the belt
5. It should be washed with a clean surface after a half-working day
Note: on the basis of the working life, good maintenance can increase the working life
