High speed Tissue Machine for jumbo rolls production
High speed Tissue Machine for jumbo rolls production
Application:
Mainly for the production of manufacture paper with pulp 13- 30 g / m2, toilet paper. Paper napkin base paper
Crafts Parameters:
Pulp: wood pulp plate, waste paper etc as raw material
- Feeding pulp concentration : 0.3-0.9‰
- Beating degrees : 30-38°S
- Paper sheet dryness
come out from wire case : 18-20%
Before go through MG cylinder : 36-40%
Come out from MG cylinder : 90-94%
Finish tissue : 90-94%
- Lateral shrinkage : 8-10%
- Day running hours: 22 hours/d
- Papermaking rate : 94%
- Yield : 95%
- Touch roll line pressure: 60 KN/m
Supporting parameter:
AC voltage : 380V;50Hz
- Control voltage : 220/24V
- Water pressure: 0.3Mpa;
Working pressure: 0.2Mpa
- Compressed air pressure: 0.8Mpa;
Working pressure: 0.5Mpa
- Steam pressure: 0.6Mpa;
Working pressure:0.3Mpa
- Vacuum suction tank: 20-40Kpa
- Water requirement: pure color, remove impurities, PH value 6.8
Main Technical Parameters:
Paper weight: 18-30g/m2
- Net width of paper :1575mm
- Designed speed : 250m/min
- Working speed: 160-230m/min
- Nominal capacity : 4-6T/D
- Track gauge : 2400mm
- Wrinkling rate : 15-30℅
- Drive way: Y-type AC motor drive division, section drive
- Control way:frequency conversion
- Power:
MG cylinder motor: 95kw
Roll-cylinder motor: 7.5kw
Total:102.5Kw
- Arrangement: single-layer, the left and right hand arrangement
| Item / PM type | 1575 | 1880 | 2400 | 2900 | 3500 | 3900 |
| Design Speed (m/min) | 250 | 250 | 250 | 250 | 250 | 250 |
| Working Speed (m/min) | 160-230 | 160-230 | 160-230 | 160-230 | 160-230 | 160-230 |
| GSM Range (g/m2) | 13-30 | 13-30 | 13-30 | 13-30 | 13-30 | 13-30 |
| Capacity | 4-6 | 5-8 | 7-10 | 8-12 | 10-15 | 11-18 |
| Diameter of Dryer (mm) | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 | Φ2500-3000 |
| Motor (kw) | 37-45 | 45-55 | 55-75 | 75-90 | 90-110 | 90-110 |
| Gauge(mm) | 2400 | 2800 | 3400 | 3900 | 4500 | 4800 |
Photos:
