Products

Application:
Mainly for the production of manufacture paper with pulp 18 - 30 g /m2toilet paper. Paper napkin base paper

Crafts Parameters:

1. Pulp: wood pulp plate, waste paper etc as raw material
2. Feeding pulp concentration : 0.3-0.9‰
3. Beating degrees : 30-38°SR
4. Paper sheet dryness

come out from wire case : 18-20%
Before go through MG cylinder : 36-40%
Come out from MG cylinder : 90-94%
Finish tissue : 90-94%

1. Lateral shrinkage : 8-10%
2. Day running hours: 22 hours/d
3. Papermaking rate : 94%
4. Yield : 95%
5. Touch roll line pressure: 60 KN/m

Supporting parameter

1. AC voltage : 380V;50Hz
2. Control voltage : 220/24V
3. Water pressure: 0.3Mpa;

Working pressure: 0.2Mpa

1. Compressed air pressure: 0.8Mpa;

Working pressure: 0.5Mpa

1. Steam pressure: 0.6Mpa;

Working pressure:0.3Mpa

1. Vacuum suction tank: 20-40Kpa
2. Water requirement: pure color, remove impurities, PH value 6.8

Main Technical Parameters:

1. Paper weight: 18-30g/m2
2. Net width of paper :3900mm
3. Designed speed : 230m/min
4. Working speed: 150-200m/min
5. Nominal capacity : 10T/D
6. Track gauge : 4600mm
7. Wrinkling rate : 15-30℅
8. Drive way: Y-type AC motor drive division, section drive
9. Control way:frequency conversion
10. Power:

MG cylinder motor: 95kw
Roll-cylinder motor: 7.5kw
Total:102.5Kw

1. Arrangement: single-layer, the left and right hand arrangement