Seamless Double Side Battery Pasting Belt

Seamless Double Side Battery Pasting Belt

Our Battery Pasting Belt Brief Introduction

Our Synthetic Pasting Belt is made of synthetic fibre material with a special process of needling. It has no seams and strong water absorption. It is made of anti-elongation material, single-side covered synthetic rubber, compounded by special process, Our Battery Pasting Belt with soft and suitable friction coefficient, stable, high tensile strength, small elongation, flat plate conveying, improved coating rate, service life Long, reducing the number of times the Battery Pasting Belt are replaced, high precision coating, small deviation, and is generally suitable for the use of thick plates.

Our Endless Pasting Belt Details

Product Name -------------------------------- Synthetic Fiber Seamless Pasting Belts
Color ------------------------------------------ White
Material -------------------------------------- Synthetic Fiber
Application ---------------------------------- Energy storage battery plate paste
Available size -------------------------------- 1930mm*230mm*6mm
Applied environment ----------------------- Wear resistance, corrosion resistance, slip resistance, acid-proof, alkali resistance

Advantage of our Seamless Pasting Belt

• "Non woven" structure

• Constant thickness

• Top and bottom of the belt with equal surface  

• Longer duration of the belt 

• Surface with high abrasion resistance

• Truly endless surface, with the same strength in all the belt`s sections and no weak points

Application of Battery Grid Pasting Conveyor Belt

This kind of Battery Pasting Belt is mainly used various of Battery Plate Pasting Machine, such as MAC,Golden Sunlight, etc. We could produce the specific size as your demands. We make sure that the belt we made will be suitable for your Battery Plate Pasting Machine. The application show of the pasting belt for your reference:

Packing&Delivery

Packing: woven bag/plastic bag

Delivery: by ari/by sea/by courier

Use caution

First, belt storage

Store the Battery Pasting Belt in a cool and dry environment. The rational environment is 20C° temperature and 50% humidity. Do not place the belt under direct sunlight, high temperature (low), or excessive humidity. Otherwise, it will affect the belt. Surface material properties.

Second, belt installation

Before installing the Battery Pasting Belt, remove any oil, cotton, and other foreign materials on the surface of the belt and the Roller and the roller to prevent the belt from walking abnormally. Belts with joints are different depending on the application during installation. Please pay attention to the belt running direction.

Third, install & Adjustment

The deviation of the Battery Pasting Belt will cause the damage of the Conveyor Belt, which can be corrected by adjusting the roller, etc. The belt will have a little extension after installation.

In a state with a certain degree of tension, let the belt rotate for 1-2 weeks so that the overall tension of the belt is uniform. At this time, the tension pulley is properly fixed. After 24 hours of operation, the tensioning wheel is adjusted again. At this time, the intermediate material of the belt has been fully stretched and the belt will no longer extend.

Fourth, belt maintenance

Keep the Battery Pasting Belt and roller clean during use. Never use stupid chemicals to wipe the belt.