Double Pneumatic Industrial Diaphragm Pump Easy Maintenance

Low Noise Pneumatic Industrial Diaphragm Pump Easy Maintenance High Reliability

Pneumatic Industrial Diaphragm Pump Introduction

Air Operated Diaphragm Pump is a new type of conveying machinery that uses compressed air as the power source, and can pump all kinds of corrosive liquids. Its performance parameters are similar to those of imported Pumps. It is placed in various special occasions and used to pump various media that cannot be pumped by conventional pumps. It has achieved satisfactory results. It can also be divided into cast iron, stainless steel, aluminum alloy, etc. according to user requirements. Fluoroplastics.

Pneumatic Industrial Diaphragm Pump Feild Of Application

1. Chemical Processing: Pneumatic diaphragm pumps are often used in the chemical industry to transfer corrosive, abrasive, or viscous fluids. They can handle a wide range of chemicals, including acids, alkalis, solvents, and polymers.
2. Food and Beverage: In the food and beverage industry, pneumatic diaphragm pumps are used to transfer viscous liquids such as honey, molasses, and chocolate. They can also handle fluids that require careful handling, such as dairy products and juices.
3. Pharmaceuticals: Pneumatic diaphragm pumps are used in the pharmaceutical industry to transfer fluids that require precise metering and handling, such as vaccines, antibiotics, and other sensitive products.
4. Wastewater Treatment: Pneumatic diaphragm pumps are used in wastewater treatment plants to transfer sludge and other fluids containing solids. They can handle fluids with a high solids content and are resistant to clogging and damage.
5. Mining and construction: Pneumatic diaphragm pumps are used in mining and construction applications to transfer abrasive fluids and slurries. They can handle fluids containing large particles and are designed to be durable and reliable in harsh environments.

Pneumatic Industrial Diaphragm Pump Main Features 

1. No need for irrigation and diversion, it can work submerged in the medium, the suction lift is up to 5m, the lift is up to 50m, and the outlet pressure is ≥6bar.
2. The flow is spacious and the passing performance is good, the maximum particle diameter allowed to pass is 10mm. When pumping mud and impurities, there is little wear on the pump.
3. Head and flow can be adjusted through the opening of the air Valve (the air pressure can be adjusted between 1-7 bar).
4. Air-Powered Diaphragm Pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the transported medium will not leak out.
5. Simple structure, less wearing parts, the pump is simple in structure, easy to install and maintain.
6. Can transport viscous liquid (viscosity below 10,000 centipoise).
7. The pump does not need to be lubricated with oil, even if it is idling. It has no effect on the pump, which is the biggest feature of the pump.
8. AODD Pump is easy to use, reliable work, just open and close the gas valve to start and stop.

Pneumatic Industrial Diaphragm Pump Performance Parameter Table